ALL THREAD ROD ANCHOR BOLTS
Threaded Rod Anchor Bolts are used to anchor a structure to a concrete foundation. They are embedded in concrete. Usually a nut, or welded nut, creates resistance to prevent the anchor from pulling out of the concrete when a load is applied. Threaded rod can also be used in conjunction with Anchoring Adhesive for installation in existing concrete. STS Industrial will cut the threaded rod to length per customer specifications.
AVAILABLE GRADES & FINISHES:
|1/4 through 1 1/2″||ASTM A307 A||Zinc Plated|
|1/4 through 1 1/2″||ASTM A307 A||Galvanized|
|1/2, 5/8, 3/4, 1″||ASTM F1554 Grade 36||Galvanized|
|1/4 through 7/16″, & 9/16″||304 Stainless Steel||Stainless Steel|
|1/2″, & 5/8 through 1 1/2″||ASTM A193 Grade B8||Stainless Steel|
|1/4 through 3/4″||ASTM A193 Grade B7||Zinc Plated|
|1/4 through 3″||ASTM A193 Grade B7||Plain|
|1/4 through 7/16″, & 9/16″||316 Stainless Steel||Stainless Steel|
|1/2″, & 5/8 through 1 1/2″||ASTM A193 Grade B8M||Stainless Steel|
|1/2″, & 5/8 through 1 1/4″||ASTM A354 Grade BD||Plain|
Other grades and finishes available upon request.
Sources: ASTM Standards for Mechanical Fasteners and Related Processes 2nd Edition, Inch Fastener Standards 8th Edition, Kanebridge Fastener Reference Guide 4th Edition
Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.