STS Industrial - Bolts & Screws

 

ADHESIVE RETAINING CAPS

AUTHORIZED SIMPSON STRONG-TIE DISTRIBUTOR

Adhesive retaining caps make overhead and horizontal installation easier by preventing the adhesive from running out of the hole. They also center the rod in the hole, making them ideal for applications where precise anchor placement is required. It may be necessary to provide support for the insert during cure time. Adhesive retaining caps are not designed to support the weight of the insert in overhead installations.

Retaining Caps

ADHESIVE RETAINING CAPS FOR EPOXY ADHESIVE

Retaining Caps Product Data

*8 packages of 25.

 

ADHESIVE RETAINING CAPS FOR ACRYLIC ADHESIVE

Retaining Caps Product Data

*8 packages of 25.

INSTALLATION:

Adhesive Retaining Caps Installation

The “X” cut in the cap allows the mixing nozzle and insert to pass through, while containing the adhesive in the hole.

 

Sources: ASTM Standards for Mechanical Fasteners and Related Processes 2nd Edition, Inch Fastener Standards 8th Edition, Simpson Strong-Tie Anchoring and Fastening Systems for Concrete and Masonry, StrongTie.com

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.