STS Industrial - Bolts & Screws

 

ADHESIVE MIXING NOZZLES

AUTHORIZED SIMPSON STRONG-TIE DISTRIBUTOR

Mixing nozzles are designed for the proper proportioning and mixing of the different adhesive formulations. Use only appropriate Simpson Strong-Tie mixing nozzle in accordance with Simpson Strong-Tie instructions. Modification or improper use of the mixing nozzle may impair epoxy or acrylic performance.

MIXING NOZZLE

DESCRIPTION

SIMPSON STRONG-TIE® ADHESIVE

EMN22i

EMN22

An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesives cartridges. This is a one-piece nozzle with integrated nut (separate retaining nut not required). SET-XP

ET-HP

SET

EDOT

AMN19Q

AMN813

A 19-element, high-efficiency static mixing nozzle for use with all acrylic adhesive products. AT-XP

AT

EMN37A

EMN50

An 18-element, high-strength, mixing nozzle for dispensing epoxy adhesive through bulk metering equipment. EDOT (Metered Applications)

Sources: ASTM Standards for Mechanical Fasteners and Related Processes 2nd Edition, Inch Fastener Standards 8th Edition, Simpson Strong-Tie Anchoring and Fastening Systems for Concrete and Masonry, StrongTie.com

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.