STS Industrial - Bolts & Screws

 

COBALT ANNULAR CUTTER

Cobalt Annular Cutters are manufactured from extremely hard cobalt steel for use in certain applications drilling hard alloys.

FEATURES:
  • Cobalt steel construction
  • Standard 3/4″ and 1 1/4″ shanks
  • 1″, 2″, or 3″ depths of cut

Cobalt Annular Cutter

  • AVAILABLE SIZES:

    1″ DEPTH OF CUT

    2″ DEPTH OF CUT

    3″ DEPTH OF CUT

      7/16   7/16
      1/2   1/2
      9/16   9/16
      5/8   5/8
     11/16  11/16
      3/4   3/4   3/4
     13/16  13/16  13/16
      7/8   7/8   7/8
     15/16  15/16  15/16
    1 1 1
    1  1/16 1  1/16 1  1/16
    1  1/8 1  1/8 1  1/8
    1  3/16 1  3/16 1  3/16
    1  1/4 1  1/4 1  1/4
    1  5/16 1  5/16 1  5/16
    1  3/8 1  3/8 1  3/8
    1  7/16 1  7/16 1  7/16
    1  1/2 1  1/2 1  1/2
    1  9/16 1  9/16 1  9/16
    1  5/8 1  5/8 1  5/8
    1 11/16 1 11/16 1 11/16
    1  3/4 1  3/4 1  3/4
    1 13/16 1 13/16 1 13/16
    1  7/8 1  7/8 1  7/8
    1 15/16 1 15/16 1 15/16
    2 2 2
    2  1/16 2  1/16 2  1/16
    2  1/8 2  1/8 2  1/8
    2  3/16 2  3/16 2  3/16
    2  1/4 2  1/4 2  1/4
    2  5/16
    2  3/8
    2  7/16
    2  1/2

    All dimensions in inches.

  • RECOMMENDED SPEEDS:

    High Speed Steel Annular Cutter Recommended Speeds

    All speeds are in RPM.

Sources: Drillco Cutting Tools Product Catalog 2013, Champion Cutting Tools 2011 Product Catalog, Norseman/CTD Product Catalog 2013

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.