CARBIDE TIPPED STACK GEOMETRY ANNULAR CUTTER
Engineered for drilling multiple plates at one time. Stack plate, or laminate drilling is often encountered when drilling truck frames, as well as other industrial and commercial applications. The teeth are manufactured with a special inner diameter grind to ensure efficient cutting without the traditional “top hat brim”. This enables multiple slugs to collect inside the cutter, and then be cleanly ejected once the final plate is drilled. Carbide tipped stack cutters are high performance tools for drilling more holes, through more materials… faster. Maximize the performance of any portable magnetic drill press. Cut holes in cast iron, steel, and ultra hard or exotic alloys with the added ability to produce overlapping or interrupted holes easily.
- Ultra-hard Carbide teeth with inner diameter grind for stacked plate applications
- Drills holes faster and easier than any other type of annular cutter
- Drill multiple layers of extremely hard plate, such as truck frames
- Standard 3/4″ shank
- 1-3/8″ and 2″ depths of cut
All speeds are in RPM.
|1 3/8″ DEPTH OF CUT||2″ DEPTH OF CUT|
All dimensions in inches.
Sources: Drillco Cutting Tools Product Catalog 2013, Champion Cutting Tools 2011 Product Catalog, Norseman/CTD Product Catalog 2013
Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.