STS Industrial - Bolts & Screws

 

HIGH SPEED STEEL ANNULAR CUTTER

High speed steel annular cutters are good for general use drilling of large diameter holes in low and medium carbon steel. The Plus 20 surface treatment increases lubricity providing cleaner cuts, positive slug ejection, and longer tool life.

FEATURES:
  • M2 high speed steel
  • “Plus 20” surface treatment for increased performance and tool life
  • Standard 3/4″ shank, 2 5/16″ diameter and larger have 1 1/4″ shank
  • 1″, 2″, or 3″ depths of cut

High Speed Steel Annular Cutter

  • AVAILABLE SIZES:

    1″ DEPTH OF CUT

    2″ DEPTH OF CUT

    3″ DEPTH OF CUT

      7/16   7/16
      1/2   1/2
     17/32  17/32
      9/16   9/16
      5/8   5/8
     21/32
     11/16  11/16
     23/32
      3/4   3/4   3/4
     25/32
     13/16  13/16  13/16
      7/8   7/8   7/8
     15/16  15/16  15/16
    1 1 1
    1  1/16 1  1/16 1  1/16
    1  1/8 1  1/8 1  1/8
    1  3/16 1  3/16 1  3/16
    1  1/4 1  1/4 1  1/4
    1  5/16 1  5/16 1  5/16
    1  3/8 1  3/8 1  3/8
    1  7/16 1  7/16 1  7/16
    1  1/2 1  1/2 1  1/2
    1  9/16 1  9/16 1  9/16
    1  5/8 1  5/8 1  5/8
    1 11/16 1 11/16 1 11/16
    1  3/4 1  3/4 1  3/4
    1 13/16 1 13/16 1 13/16
    1  7/8 1  7/8 1  7/8
    1 15/16 1 15/16 1 15/16
    2 2 2
    2  1/16 2  1/16 2  1/16
    2  1/8 2  1/8 2  1/8
    2  3/16 2  3/16 2  3/16
    2  1/4 2  1/4 2  1/4
    2  5/16 2  5/16 2  5/16
    2  3/8 2  3/8 2  3/8
    2  7/16 2  7/16 2  7/16
    2  1/2 2  1/2 2  1/2
    2  9/16 2  9/16 2  9/16
    2  5/8 2  5/8 2  5/8
    2 11/16 2 11/16 2 11/16
    2  3/4 2  3/4 2  3/4
    2 13/16 2 13/16 2 13/16
    2  7/8 2  7/8 2  7/8
    2 15/16 2 15/16 2 15/16
    3 3 3
    3  1/16 3  1/16 3  1/16
    3  1/8 3  1/8 3  1/8
    3  3/16 3  3/16 3  3/16
    3  1/4 3  1/4 3  1/4
    3  5/16 3  5/16 3  5/16
    3  3/8 3  3/8 3  3/8
    3  7/16 3  7/16 3  7/16
    3  1/2 3  1/2 3  1/2
    3  9/16 3  9/16 3  9/16
    3  5/8 3  5/8 3  5/8
    3 11/16 3 11/16 3 11/16
    3  3/4 3  3/4 3  3/4
    3 13/16 3 13/16 3 13/16
    3  7/8 3  7/8 3  7/8
    3 15/16 3 15/16 3 15/16
    4 4 4

    All dimensions in inches.

  • RECOMMENDED SPEEDS:

    High Speed Steel Annular Cutter Recommended Speeds

    All speeds are in RPM.

Sources: Drillco Cutting Tools Product Catalog 2013, Champion Cutting Tools 2011 Product Catalog, Norseman/CTD Product Catalog 2013

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.