STS Industrial - Bolts & Screws

 

METRIC HIGH SPEED STEEL ANNULAR CUTTER

Metric high speed steel annular cutters are good for general use drilling of large diameter holes in low and medium carbon steel. The Plus 20 surface treatment increases lubricity providing cleaner cuts, positive slug ejection, and longer tool life.

FEATURES:
  • M2 high speed steel
  • “Plus 20” surface treatment for increased performance and tool life
  • Standard 3/4″ shank on all diameters
  • 1″ and  2″ depths of cut

High Speed Steel Annular Cutter

  • AVAILABLE SIZES:

    1″ DEPTH OF CUT

    2″ DEPTH OF CUT

    13 mm 13 mm
    14 mm 14 mm
    15 mm 15 mm
    16 mm 16 mm
    17 mm 17 mm
    18 mm 18 mm
    19 mm 19 mm
    20 mm 20 mm
    21 mm 21 mm
    22 mm 22 mm
    23 mm 23 mm
    24 mm 24 mm
    25 mm 25 mm
    26 mm 26 mm
    27 mm 27 mm
    28 mm 28 mm
    29 mm 29 mm
    30 mm 30 mm
    31 mm 31 mm
    32 mm 32 mm
    33 mm 33 mm
    34 mm 34 mm
    35 mm 35 mm
    36 mm 36 mm
    37 mm 37 mm
    38 mm 38 mm
    39 mm 39 mm
    40 mm 40 mm
    41 mm 41 mm
    42 mm 42 mm
    43 mm 43 mm
    44 mm 44 mm
    45 mm 45 mm
    46 mm 46 mm
    47 mm 47 mm
    48 mm 48 mm
    49 mm 49 mm
    50 mm 50 mm

  • RECOMMENDED SPEEDS:

    To use this table with metric annular cutters, find the equivalent diameter in the left hand column.

    High Speed Steel Annular Cutter Recommended Speeds

    All speeds are in RPM.

Sources: Drillco Cutting Tools Product Catalog 2013, Champion Cutting Tools 2011 Product Catalog, Norseman/CTD Product Catalog 2013

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.