STS Industrial - Bolts & Screws

 

FIG 133 STANDARD DUTY BEAM CLAMP

APPLICATION

The Figure 133 Standard Duty Beam Clamp centers the load on beam to prevent distortion.

SIZE RANGE

4″ through 12″

MATERIAL

Carbon Steel

MAX TEMP

Plain 750° F, Galvanized 450° F

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A (Type 21), WW-H-171-E (Type 21), ANSI/MSS SP-69 and MSS SP-58 (Type 21). Fig 133 UL Listed when used with  3/8″ and 1/2″ rod.

NOTE

Spacer is furnished for use with Fig 290 eye nuts. Spacer may be removed for use with Fig 278 eye rod.

Fig 133 Standard Duty Beam Clamp

  • DIMENSIONS & LOADS:

    Beam Clamp Drawing

    Beam Clamp Flange Size

    Beam Clamp Loads and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 133

    Carpenter & Paterson Figure 15, 702
    Piping Technology Figure 130
    PHD Figure 610
    B-LINE Figure B3050-2

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware