STS Industrial - Bolts & Screws

 

ROD COUPLING

FIG 135: STRAIGHT WITH SIGHT HOLE

FIG 135E: STRAIGHT LESS SIGHT HOLE

FIG 135R: REDUCING

APPLICATION

The Figure 135 Rod Couplings are designed for connecting 2 threaded rods together where no adjustment after installation is needed.

The Fig. 135 has a sight hole for post-installation inspection. The Fig. 135E is a standard rod coupling, and the Fig. 135R accepts reduced diameter threaded rod on one end.

SIZE RANGE

1/4″ through 1″

MATERIAL

Carbon Steel

FINISH

Fig 135: Plain, Fig 135E and Fig 135R: Galvanized

Fig 135, Fig 135E, Fig 135R Rod Coupling

  • DIMENSIONS & LOADS:

    Fig 135, Fig 135E, Fig 135R Rod Coupling Drawing

    Fig 135, Fig 135E, Fig 135R Rod Coupling Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 135

    Carpenter & Paterson Figure 123W
    Piping Technology
    PHD
    B-LINE

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 135E

    Carpenter & Paterson Figure 123
    Piping Technology
    PHD Figure 100
    B-LINE Figure B655

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 135R

    Carpenter & Paterson Figure 123R
    Piping Technology
    PHD Figure 105
    B-LINE Figure B656

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    Coupling Nut

    Coupling Nut with Sight Hole

    Reducing Coupling Nut

    Threaded Rod Coupling

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.