STS Industrial - Bolts & Screws

 

MALLEABLE ROD COUPLING

FIG 136: STRAIGHT

FIG 136R: STRAIGHT

APPLICATION

The Figure 135 Rod Couplings are designed for connecting 2 threaded rods together where no adjustment after installation is needed.The Fig. 136 and 136R has a sight hole for post-installation inspection of thread engagement. The Fig. 136R accepts reduced diameter threaded rod on one end.

SIZE RANGE

1/4″ through 1″

MATERIAL

Malleable Iron

FINISH

Plain or Galvanized

Fig 136 and Fig 136R Malleable Rod Coupling

  • DIMENSIONS & LOADS:

    Fig 136 and Fig 136R Malleable Rod Coupling Drawing

    Fig 136 and Fig 136R Malleable Rod Coupling Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 136

    Carpenter & Paterson Figure 167
    Piping Technology
    PHD Figure 100
    B-LINE Figure B3220

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 136E

    Carpenter & Paterson Figure 167R
    Piping Technology
    PHD Figure 105
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.