STS Industrial - Bolts & Screws

 

FIG 137 LONG TANGENT U-BOLTS

APPLICATION

The Figure 137 Long Tangent U-Bolt is recommended for the support, or guide of heavy loads; often employed in power, process plant and marine service.

SIZE RANGE

1/2″ through 36″

MATERIAL

Carbon Steel or Stainless Steel

COMPLIANCE

Federal Specification A-A-1192A (Type 24), WW-H-171-E (Type 24), ANSI/MSS-SP-69 and MSS SP-58 (Type 24).

Fig 137 Long Tangent U-Bolt

  • INSTALLATION DRAWINGS:

    Fig 137 Long Tangent U-Bolt Installation Drawing 1

    Fig 137 Long Tangent U-Bolt Installation Drawing

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 137 Long Tangent U-Bolt Drawing

    Fig 137 Long Tangent U-Bolt Note

    Fig 137 Long Tangent U-Bolt Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 137

    Carpenter & Paterson Figure 283
    Piping Technology Figure 100
    PHD Figure 90
    B-LINE Figure B3188

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware