STS Industrial - Bolts & Screws

 

FIG 14 ADJUSTABLE SIDE BEAM CLAMP

APPLICATION

The Figure 14 Adjustable Side Beam Clamp is designed to support pipe while clamped to the bottom of a flanged beam. After installation the unit is locked into position with a hex nut and lock washer.

SIZE RANGE

3/8″ through 5/8″

MATERIAL

Carbon Steel

MAX TEMP

Plain 750° F, Galvanized 450° F

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A Type 27, MSS-SP-69 Type 27.

Fig 14 Adjustable Side Beam Clamp

  • DIMENSIONS & LOADS:
    Fig 14 Adjustable Side Beam Clamp Drawing

    Fig 14 Adjustable Side Beam Clamp Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 14

    Carpenter & Paterson Figure 14
    Piping Technology
    PHD Figure 635
    B-LINE Figure B3040

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware