STS Industrial - Bolts & Screws

 

FIG 140 MACHINE THREADED RODS

APPLICATION

The Figure 140 Machine Threaded Rod is used to suspend a pipe hanger from a beam or structural attachment.

SIZE RANGE

3/8″ through 5″

MATERIAL

Carbon Steel

FINISH

Plain or Galvanized

Fig 140 and Fig 253  Machine Threaded Rod

  • INSTALLATION DRAWINGS:

    Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing 1

    Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing 2

    Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing

    3Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing 1

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 140 and Fig 253  Machine Threaded Rod Drawing

    Fig 140 and Fig 253  Machine Threaded Rod Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 140

    Carpenter & Paterson Figure 133
    Piping Technology Figure 128
    PHD Figure 15
    B-LINE Figure B3205

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    Double Ended Rod

    Sag Rod

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware