STS Industrial - Bolts & Screws

 

FIG 146 CONTINUOUS THREADED RODS

APPLICATION

The Figure 146 Continuous Threaded Rod is used to suspend a pipe hanger from a beam or structural attachment.

SIZE RANGE

1/4″ through 1-1/2″

MATERIAL

Carbon Steel, Rod Threaded Complete Length

FINISH

Plain or Galvanized

Fig 146 Continuous Threaded Rod

  • INSTALLATION DRAWINGS:

    Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing 4

     

    Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing 2

    Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing

    3Fig 140 and Fig 253  Machine Threaded Rod Installation Drawing 1

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 146 Continuous Threaded Rod Drawing

    Fig 146 Continuous Threaded Rod Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 146

    Carpenter & Paterson Figure 94
    Piping Technology Figure 122
    PHD Figure 20
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    All Thread Rod

    Fully Threaded Rod

    Threaded Rod

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware