STS Industrial - Bolts & Screws

 

FIG 157 EXTENSION PIECE

APPLICATION

The Figure 157 Extension Piece is designed For attaching rod to various types of building attachments.

SIZE RANGE

3/8″ through 7/8″

MATERIAL

Malleable Iron

MAX TEMP

Plain 450° F, Galvanized 450° F

COMPLIANCE

UL Listed (3/8″ – 7/8″ rod size) and FM Approved (3/8″ & 1/2″ rod size).

NOTE

May be used to form an integral part of Malleable Iron Beam Clamp Fig 218.

Fig 157 Extension Piece

  • INSTALLATION DRAWINGS:

    Fig 157 Extension Piece Installation Drawing 1

    Fig 157 Extension Piece Installation Drawing 2

    Fig 157 Extension Piece Installation Drawing 3

    Fig 157 Extension Piece Installation Drawing 4

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 157 Extension Piece Drawing

    Fig 157 Extension Piece Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 157

    Carpenter & Paterson Figure 157
    Piping Technology
    PHD Figure 25
    B-LINE Figure B3203

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware