STS Industrial - Bolts & Screws

 

FIG 224 ALLOY STEEL PIPE CLAMP

APPLICATION

The Figure 224 Alloy Steel Pipe Clamp is recommended for suspension of high temperature pipe requiring up to 4″ of insulation.

SIZE RANGE

4″ through 16″

MATERIAL

Chrome Molybdenum Steel Clamp, Stainless Steel U-Bolt

MAX TEMP

1050° F

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A (Type 2), WW-H-171-E (Type 2), ANSI/MSS-SP-69 and MSS SP-58 (Type 2).

NOTE

Normally used with welded eye rod Fig 278, or weldless eye nut Fig 290.Designed to support loads at temperatures up to 1050° F, and to satisfy most critical engineering specifications. Yoke has rugged cross sectional area, eliminating high stress conditions. When used on pipe with 4″ of insulation the top bolt is outside of the insulation.

Fig 224 Alloy Steel Pipe Clamp

  • DIMENSIONS & LOADS:

    Fig 224 Alloy Steel Pipe Clamp Drawing

    Fig 224 Alloy Steel Pipe Clamp Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 224

    Carpenter & Paterson
    Piping Technology Figure 42
    PHD
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware