STS Industrial - Bolts & Screws

 

FIG 246 HEAVY DUTY ALLOY STEEL PIPE CLAMP

APPLICATION

The Figure 246 Heavy Duty Alloy Steel Pipe Clamp is recommended for the suspension of high temperature pipe requiring up to 6″ of insulation.

SIZE RANGE

10″ through 24″

MATERIAL

Chrome Molybdenum Steel Clamp, Stainless Steel U-Bolt

MAX TEMP

1075° F

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A (Type 2), WW-H-171-E (Type 2), ANSI/MSS-SP-69 and MSS SP-58 (Type 2).

NOTE

Normally used with welded eye rod Fig 278, or weldless eye nut Fig 290. Designed to support heavy loads at high temperatures. Clamp with filler plate will snugly hold pipe of non-standard size. Alloy load distribution strap provided. When used on pipe with up to 6″ of insulation, the top bolt is outside of insulation.

Fig 246 Heavy Duty Alloy Steel Pipe Clamp

  • DIMENSIONS & LOADS:

    Fig 246 Heavy Duty Alloy Steel Pipe Clamp Drawing

    Fig 246 Heavy Duty Alloy Steel Pipe Clamp Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 246

    Carpenter & Paterson
    Piping Technology Figure 43
    PHD
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware