STS Industrial - Bolts & Screws

 

TURNED EYE ROD (NOT WELDED)

FIG 248: RIGHT HAND THREADS

FIG 248L: LEFT HAND THREADS

APPLICATION

The Figure 248 Turned Eye Rod is designed to serve as a link between  a structural attachment such as a Fig 66, and a hanger such as a Fig 260 Clevis Hanger.

SIZE RANGE

3/8″ through 2-1/2″

MATERIAL

Carbon Steel

MAX TEMP

Plain 650° F, Galvanized 450° F

NOTE

Inside diameter of eye will accommodate a bolt or pin 1/8″ larger in diameter than the rod diameter. For Eye Rods 1-3/4″ and larger in diameter will accommodate a bolt or pin 1/4″ larger in diameter than the rod diameter.

Fig 248 & Fig 248L Turned Eye Rod

  • DIMENSIONS & LOADS:

    Fig 248 & Fig 248L Turned Eye Rod Drawing

    Fig 248 & Fig 248L Turned Eye Rod Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 248

    Carpenter & Paterson Figure 33
    Piping Technology Figure 120
    PHD Figure 50
    B-LINE Figure B3210

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 248L

    Carpenter & Paterson Figure 33L
    Piping Technology
    PHD Figure 50-L
    B-LINE Figure B3210L

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    Not Welded Eye Rod

    Turned Eyerod

    Eyerod

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware