STS Industrial - Bolts & Screws

 

LINKED EYE RODS

FIG 248X: NOT WELDED

FIG 278X: WELDED

APPLICATION

The use of Linked Eye Rods in a hanger assembly allows universal movement of the piping without bending and possible fracture of a straight rod.

SIZE RANGE

3/8″ through 2-1/2″

MATERIAL

Carbon Steel; Plain or Galvanized

MAX TEMP

Fig. 248X: 650° F, Fig. 278X: 750° F

NOTE

The acceptability of galvanized coatings above 450° F is at the discretion of the end user.

Fig 248X & Fig 278X Linked Eye Rods

  • DIMENSIONS & LOADS:

    Fig 248X & Fig 278X Linked Eye Rod Drawing

    Fig 248X & Fig 278X Linked Eye Rod Loads and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 248X

    Carpenter & Paterson Figure 306
    Piping Technology Figure 127
    PHD
    B-LINE Figure B3210X

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 278X

    Carpenter & Paterson Figure 341
    Piping Technology Figure 126
    PHD
    B-LINE Figure B3211X

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware