STS Industrial - Bolts & Screws

 

FIG 259 PIPE STANCHION SADDLE WITH U-BOLT

APPLICATION

The Figure 259 Pipe Stanchion Saddle is designed for use as a stanchion support with added stability provided by U-Bolt attachment to pipe. Use with Fig 63 Type P Stanchion Support.

SIZE RANGE

4″ through 36″

MATERIAL

Cast Iron Saddle with Steel Yoke and Nuts. 14″ through 36″ Carbon Steel Saddle with Steel Yoke. 4″ through 12″ Steel Saddle Available on Special Request.

FINISH

Plain or Galvanized

COMPLIANCE

Federal Specification A-A-1192A (Type 37), ANSI/MSS-SP-69 and MSS SP-58 (Type 37).

Fig 259 Pipe Stanchion Saddle

  • DIMENSIONS & LOADS:

    Fig 259 Pipe Stanchion Saddle Drawing

    Fig 259 Pipe Stanchion Saddle Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 259

    Carpenter & Paterson
    Piping Technology Figure 48
    PHD Figure 882
    B-LINE Figure B3090

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware