STS Industrial - Bolts & Screws

 

FIG 262 TWO HOLE STRAP

APPLICATION

The Figure 262 Two Hole Pipe Strap is recommended for the support of horizontal pipe line from ceiling, wall, or similar surface.

SIZE RANGE

1/2″ through 4″

MATERIAL

Carbon Steel

MAX TEMP

Plain 650° F, Galvanized 450° F

COMPLIANCE

Federal Specification A-A-1192A (Type 26), WW-H-171-E (Type 26), ANSI/MSS-SP-69 and MSS SP-58 (Type 26).

Fig 262 Two Hole Pipe Strap

  • DIMENSIONS & LOADS:

    Fig 262 Two Hole Pipe Strap Drawing

    Fig 262 Two Hole Pipe Strap Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 262

    Carpenter & Paterson Figure 72
    Piping Technology
    PHD Figure 830
    B-LINE Figure B3180

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    Short Strap

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware