STS Industrial - Bolts & Screws

 

FIG 265 ADJUSTABLE PIPE SADDLE SUPPORT

APPLICATION

The Figure 265 Adjustable Pipe Saddle Support is designed for use as a stanchion support where up to 4-1/2″ of vertical adjustment is required, plus the added stability provided by U-Bolt attachment to pipe. Use with Fig 63 Type T Stanchion Support.

SIZE RANGE

4″ through 36″

MATERIAL

Cast Iron Saddle with Steel Yoke and Nuts. Steel Locknut Nipple and Special Cast Iron Reducer. 14″ through 36″ Carbon Steel Saddle with Steel Yoke. 4″ through 12″ Steel Saddle Available Upon Special Request.

FINISH

Plain or Galvanized

COMPLIANCE

Federal Specification A-A-1192A (Type 38), WW-H-171-E (Type 39), ANSI/MSS-SP-69 and MSS SP-58 (Type 38).

Fig 265 Adjustable Pipe Saddle Support

  • DIMENSIONS & LOADS:

    Fig 265 Adjustable Pipe Saddle Support Drawing

    Fig 265 Adjustable Pipe Saddle Support Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 265

    Carpenter & Paterson
    Piping Technology Figure 46
    PHD
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware