STS Industrial - Bolts & Screws

 

WELDED EYE ROD

FIG 278: RIGHT HAND THREADS

FIG 278L: LEFT HAND THREADS

APPLICATION

The Figure 278 Welded Eye Rod is designed to serve as a link between  a structural attachment such as a Fig 66, and a hanger such as a Fig 260 Clevis Hanger. With the eye fully welded, it is a more robust design than the Fig 248 Turned Eye Rod.

SIZE RANGE

3/8″ through 2-1/2″

MATERIAL

Carbon Steel

MAX TEMP

Plain 750° F, Galvanized 450° F

NOTE

Inside diameter of eye will accommodate a bolt or pin 1/8″ larger in diameter than the rod diameter. For Eye Rods 1-3/4″ and larger in diameter will accommodate a bolt or pin 1/4″ larger in diameter than the rod diameter.

Fig 278 & Fig 278L Welded Eye Rod

  • DIMENSIONS & LOADS:

    Fig 278 & Fig 278L Welded Eye Rod Drawing

    Fig 278 & Fig 278L Welded Eye Rod Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 278

    Carpenter & Paterson Figure 93
    Piping Technology Figure 110
    PHD Figure 55
    B-LINE Figure B3211

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 278L

    Carpenter & Paterson Figure 93L
    Piping Technology
    PHD Figure 55L
    B-LINE Figure B3211L

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    Welded Eyerod

    Eyerod

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware