STS Industrial - Bolts & Screws

 

WELDLESS EYE NUTS

FIG 290: RIGHT HAND THREAD

FIG 290L: LEFT HAND THREADS

APPLICATION

The Figure 290 Weldless Eye Nut is design to be the intermediate link between threaded rod and a pinned or bolted hanger or attachment. Supports loads equal to the full limitation of the hanger rod. Provides flexible connection when used with straight threaded rod.

SIZE RANGE

3/8″ through 2-1/2″

MATERIAL

Forged Steel

FINISH

Plain or Galvanized

COMPLIANCE

Federal Specification A-A-1192A (Type 17), WW-H-171-E (Type 17), ANSI/MSS-SP-69 and MSS SP-58 (Type 17).

Fig 290 Weldless Eye Nut

  • INSTALLATION DRAWINGS:

    Fig 290 Weldless Eye Nut Installation Drawing 1

    Fig 290 Weldless Eye Nut Installation Drawing

    Fig 290 Weldless Eye Nut Installation Drawing 3

    Fig 290 Weldless Eye Nut Installation Drawing 3

    Fig 290 Weldless Eye Nut Installation Drawing 4

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 290 Weldless Eye Nut Drawing

    Fig 290 Weldless Eye Nut Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 290

    Carpenter & Paterson Figure 279
    Piping Technology Figure 40
    PHD Figure 35
    B-LINE Figure B3200

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 290L

    Carpenter & Paterson Figure 279L
    Piping Technology Figure 40L
    PHD Figure 35-L
    B-LINE Figure B3200L

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware