FIG 291 CLEVIS PIN WITH COTTERS
|The Figure 291 Clevis Pin with Cotters is meant for use with the Type C Variable Spring Hanger, Type C Constant Support (Fig 81-H Only), and Fig 66 Welded Beam Attachment.|
|1/2″ through 4″|
|Plain 650° F, Galvanized 450° F|
The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.
DIMENSIONS & LOADS:
PRODUCT CROSS REFERENCE¹:
Carpenter & Paterson – Piping Technology – PHD – B-LINE –
¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.
Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.
Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware