FIG 292L UNIVERSAL FORGED STEEL BEAM CLAMP
|The Figure 292L is designed for the suspension of heavy loads from beams with flange widths to 15″ and flange thickness to 1.031″. The weldless eye nut has left hand threads to accommodate left hand threaded rod.|
|ASME B31.1, Federal Specification A-A-1192A (Type 28 without links, Type 29 with links),WW-H-171-E (Type 28 without links, Type 29 with links), ANSI/MSS-SP-69 and MSS SP-58 (Type 28 without links, Type 29 with links).|
|Fit jaws over edges of lower beam flanges and tighten nuts on tie rod to lock clamp in place. Weldless eye nut provides for horizontal pipe movement without binding, and is furnished tapped to any specific rod size up to the maximum rod size.Tie rod assures a tight non-slip fit to the beam.The application of a load to a structural beam by means of a beam clamp produces a transverse stress, perpendicular to the axis of the beam, in the flange to which the load is applied.|
The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.
DIMENSIONS & LOADS:
PRODUCT CROSS REFERENCE¹:
Carpenter & Paterson – Piping Technology – PHD – B-LINE –
¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.
Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.
Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware