STS Industrial - Bolts & Screws

 

FIG 295H HEAVY DOUBLE BOLT PIPE CLAMP

APPLICATION

The Figure 295H Heavy Double Bolt Pipe Clamp is recommended for suspension of pipe requiring insulation within the limitation of temperature and loads shown below.

SIZE RANGE

6″ through 36″

MATERIAL

Carbon Steel

MAX TEMP

Plain 750° F, Galvanized 450° F

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A (Type 3), WW-H-171-E (Type 3), ANSI/MSS-SP-69 and MSS SP-58 (Type 3).

NOTE

Accommodate up to 4″ thick insulation.The picture to the right is representative of a typical Figure 295H. Distance between clamp ears beneath pipe may or may not be equal to upper gap.

Fig 295H Heavy Double Bolt Pipe Clamp

  • INSTALLATION DRAWINGS:

    Fig 295H Heavy Double Bolt Pipe Clamp Installation Drawing 1

    Fig 295H Heavy Double Bolt Pipe Clamp Installation Drawing 2

    Fig 295H Heavy Double Bolt Pipe Clamp Installation Drawing 3

    Fig 295H Heavy Double Bolt Pipe Clamp Installation Drawing 4

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 295H Heavy Double Bolt Pipe Clamp Drawing

    Fig 295H Heavy Double Bolt Pipe Clamp Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 295H

    Carpenter & Paterson
    Piping Technology Figure 80
    PHD Figure 525H
    B-LINE Figure B3146

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware