STS Industrial - Bolts & Screws

 

FIG 299 FORGED STEEL CLEVIS

APPLICATION

The Figure 299 Forged Steel Clevis is designed to attach threaded rod to a lug, such as the Fig 55 weld lug.

SIZE RANGE

3/8″ through 4″

MATERIAL

Forged Steel

FINISH

Plain or Galvanized

COMPLIANCE

Federal Specification A-A-1192A (Type 14), WW-H-171-E (Type 14), ANSI/MSS-SP-69 and MSS SP-58 (Type 14).

Fig 299 Forged Steel Clevis

  • INSTALLATION DRAWINGS:

    Fig 299 Forged Steel Clevis Installation Drawing 1

    Fig 299 Forged Steel Clevis Installation Drawing

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 299 Forged Steel Clevis Drawing

    Fig 299 Forged Steel Clevis Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 299

    Carpenter & Paterson Figure 216,276
    Piping Technology Figure 95
    PHD Figure 38
    B-LINE Figure B3201

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware