STS Industrial - Bolts & Screws

 

FIG 432 SPECIAL CLAMP FOR PIPE SLIDES

APPLICATION

The Figure 432 Special Pipe Clamp for Pipe Slides is used with, and where, pipe slides cannot be welded directly to pipe or copper tube. When used with fiberglass, plastic, or aluminum pipe, a thin protective liner should be inserted in between the pipe and the clamp. Clamp is designed for use with Figures 257 and 436, and Figure 439 slides and tees.

SIZE RANGE

2″ through 24″

MATERIAL

Carbon Steel

MAX TEMP

Plain 750° F, Galvanized 450° F (temperatures valid for carbon steel pipe only)

Fig 432

  • INSTALLATION DRAWINGS:

    Fig 432 Special Pipe Clamp Installation Drawings

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 432 Special Pipe Clamp Drawing

    Fig 432 Special Pipe Clamp Weights and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 432

    Carpenter & Paterson
    Piping Technology
    PHD
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware