STS Industrial - Bolts & Screws

 

FIG 45 TRAPEZE CHANNEL ASSEMBLY

APPLICATION

The Figure 45 Trapeze Channel Assembly is composed of two channels back to back with a spacer welded on each end.

MATERIAL

Carbon Steel

NOTE

Can also be used with a U-bolt Fig. 137 & Fig. 60 washer plates to secure pipe to the center of channel assembly.

Fig 45 Trapeze Channel Assembly

  • DIMENSIONS & LOADS:

    Fig 45 Trapeze Channel Assembly Drawing

    Fig 45 Trapeze Channel Assembly Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 45

    Carpenter & Paterson Figure 371
    Piping Technology
    PHD
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware