STS Industrial - Bolts & Screws

 

STRUCTURAL WELDING LUG

FIG 55 (SHORT) / FIG 55L (LONG)

APPLICATION

The Figure 55 and Figure 55L Structural Welding Lugs are intended for attachment to structural steel in conjunction with the Fig 299 Clevis.

SIZE RANGE

Fig 55: 1/2″ through 3-3/4″Fig 55L: 1/2″ through 2″

MATERIAL

Carbon Steel

MAX TEMP

Plain 750° F, Galvanized 450° F

COMPLIANCE

ASME B31.1, A-A-1192A (Type 57) and MSS SP-58 (Type 57)

Fig 55-55L Structural Welding Lug

  • DIMENSIONS & LOADS:

    Fig 55-55L Structural Welding Lug Drawing

    Fig 55-55L Structural Welding Lug Loads, Weights, and Dimensions

    * Note: Rod size “A” is the assembly rod diameter. Dimension not shown on drawing.

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 55 / 55L

    Carpenter & Paterson Figure 220
    Piping Technology Figure 72
    PHD Figure 936
    B-LINE Figure B3080

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware