STS Industrial - Bolts & Screws

 

FIG 62 ADJUSTABLE PIPE STANCHION SUPPORTS

TYPES A, B, AND C

APPLICATION

The Figure 62 Adjustable Pipe Stanchion Supports come in three types, A, B, and C. These supports are a two piece design allowing the final fit to be done in the field. The two pieces are joined with a field welded, and the upper piece is field-welded to the pipe that is supported.

ORDERING

Specify type, pipe size, top stanchion size, material specification, and “D” dimension. For base plates that require holes, also specify the hole size, and the center line to center line of the holes.

SIZING AND DIMENSIONS:

Fig 62 Type A Adjustable Pipe Stanchion Support

Fig 62 Type B Adjustable Pipe Stanchion Support

Fig 62 Type C Adjustable Pipe Stanchion Support

 FIG 62 TYPE A (L.R. ELBOW)
 FIG 62 TYPE B (S.R. ELBOW)
 FIG 62 TYPE C (HORIZONTAL PIPE)

Fig 62 Adjustable Pipe Stanchion Support Sizing

Fig 62 Adjustable Pipe Stanchion Support Dimensions

  • ALSO KNOWN AS

    Adjustable Pipe Stand

    Two Piece Pipe Stand

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware