STS Industrial - Bolts & Screws

 

FIG 65 LIGHT DUTY ADJUSTABLE CLEVIS HANGER

APPLICATION

The Figure 65 Light Duty Clevis Hanger is recommended for the suspension of stationary pipe or conduit in light duty service. Hanger load nut above clevis must be tightened securely to assure proper hanger performance. Vertical adjustment without removing pipe may be made. Adjustment varies with the size of clevis. Tighten upper nut after adjustment.

SIZE RANGE

3/8″ through 4″

MATERIAL

Carbon Steel

MAX TEMP

Plain 750° F, Galvanized 450° F

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A Type 1, MSS-SP-69 Type 1.

NOTE

When an oversized clevis is used, a pipe spacer or multispacer should be placed over clevis bolt to ensure that the lower U-strap will not move in on the bolt.

 

Fig 65 Light Duty Adjustable Clevis Hanger

  • INSTALLATION DRAWINGS:

    Fig 65 Light Duty Adjustable Clevis Hanger Installation Drawing

    Fig 65 Light Duty Adjustable Clevis Hanger Installation Drawing

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 65 Light Duty Adjustable Clevis Hanger Drawing

    Fig 65 Light Duty Adjustable Clevis Hanger Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 65

    Carpenter & Paterson Figure 200
    Piping Technology
    PHD Figure 440
    B-LINE Figure B3104

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    Light Duty Saddle Clamp

    Light Duty Stirrup Hanger

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware