STS Industrial - Bolts & Screws

 

FIG 94 WIDE THROAT TOP BEAM C-CLAMP

APPLICATION

The Figure 94 Wide Throat Top Beam C-Clamp is recommended for use under roof installations with bar joist type construction, or for attachment to the top flange of structural shapes where the vertical hanger rod is required to be offset from the edge of the flange, and where the thickness of joists or flange does not exceed 1 5/16″.

SIZE RANGE

5/8″ and 3/4″

MATERIAL

Malleable/Ductile Iron Body, Hardened Steel Cup Point Set Screw and Lock Nut.

FINISH

Plain or Galvanized

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A (Type 19), WW-H-171E-E (Type 19), ANSI/MSS-SP-69 and MSS SP-58 (Type 19 and 23). UL Listed and FM Approved.

NOTE

Provides clamping to bar joists which are directly under roof installations. Follow recommended set screw torque values.

Fig 94 Wide Throat Toop Beam C-Clamp

  • INSTALLATION DRAWINGS:

    Fig 94 Wide Throat Toop Beam C-Clamp Installation Drawing

    Fig 92 Universal C-Clamp Installaion Drawing 4

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Fig 94 Wide Throat Toop Beam C-Clamp Drawing

    Fig 94 Wide Throat Toop Beam C-Clamp Loads, Weights, and Dimensions

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 94

    Carpenter & Paterson Figure 192
    Piping Technology
    PHD Figure 360
    B-LINE Figure B3033

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware