STS Industrial - Bolts & Screws

 

G-CLIPS™ FOR STEEL GRATING

APPLICATION:

Grating fasteners to attach steel grating to a horizontal-facing structural member edge.

G-Clip describes an assembly of fastener parts, each containing three common parts. First is a G-Clips unique top for better holding strength. Second, a G-Clips patented bottom connects to the beam underside. A hex head cap screw connects the two, and its length suits the grating height being installed.

 

G-Clips for Steel Grating

VARIATIONS:
  • MODEL GG

    DESCRIPTION:

    Most common model G-Clip. Hot dipped galvanized finish. Intended for use attaching standard grating to structural members.

    GG G-Clip for Steel Grating

     

    SIZING CHART:

    GRATING THICKNESS

    STRUCTURAL MEMBER FLANGE THICKNESS

    1/4” to 3/4” 3/4” to 1-1/4” 1-1/4” to 1-3/4” 1-3/4” to 2-1/4”
    1 in. GG-1A GG-2A GG-3A GG-4A
    1-1/4 in. GG-1B GG-2B GG-3B GG-4B
    1-1/2 in. GG-1C GG-2C GG-3C GG-4C
    1-3/4 in. GG-1D GG-2D GG-3D GG-4D
    2 in. GG-1E GG-2E GG-3E GG-4E

     

  • MODEL WSSGG

    DESCRIPTION:

    316 stainless steel. Intended for use attaching grating to structural members in select corrosive environments.

    WSSGG G-Clip for Steel Grating

     

    SIZING CHART:

    GRATING THICKNESS

    STRUCTURAL MEMBER FLANGE THICKNESS

    1/4” to 3/4” 3/4” to 1-1/4” 1-1/4” to 1-3/4” 1-3/4” to 2-1/4”
    1 in. WSSGG-1A WSSGG-2A WSSGG-3A WSSGG-4A
    1-1/4 in. WSSGG-1B WSSGG-2B WSSGG-3B WSSGG-4B
    1-1/2 in. WSSGG-1C WSSGG-2C WSSGG-3C WSSGG-4C
    1-3/4 in. WSSGG-1D WSSGG-2D WSSGG-3D WSSGG-4D
    2 in. WSSGG-1E WSSGG-2E WSSGG-3E WSSGG-4E
  • MODEL RSSGC

    DESCRIPTION:

    316 stainless steel, “Close Grip”. G-Clip model RSSGC is a 316-stainless steel grating fastener used to fasten close-mesh bar grating to structural shapes, where the structural flange is in a horizontal plane. Unit has a unique narrow width to accommodate very narrow (3/8″) grating slots.

    RSSGC G-Clip for Steel Grating

    SIZING CHART:

    GRATING THICKNESS

    STRUCTURAL MEMBER FLANGE THICKNESS

    1/4” to 3/4” 3/4” to 1-1/4” 1-1/4” to 1-3/4” 1-3/4” to 2-1/4”
    1 in. RSSGC-1A RSSGC-2A RSSGC-3A RSSGC-4A
    1-1/4 in. RSSGC-1B RSSGC-2B RSSGC-3B RSSGC-4B
    1-1/2 in. RSSGC-1C RSSGC-2C RSSGC-3C RSSGC-4C
    1-3/4 in. RSSGC-1D RSSGC-2D RSSGC-3D RSSGC-4D
    2 in. RSSGC-1E RSSGC-2E RSSGC-3E RSSGC-4E
  • MODEL GN-1

    DESCRIPTION:

    G-Clip model GN-1 is a galvanized carbon steel grating fastener used to fasten 15-space bar grating to structural shapes, where the structural flange is in a horizontal plane. This unit has a narrower width than the Model GG series.

    GN-1 G-Clip for Steel Grating

    SIZING CHART:

    GRATING THICKNESS

    STRUCTURAL MEMBER FLANGE THICKNESS

    1/4” to 3/4”
    1 in. GN-1A
    1-1/4 in. GN-1B
    1-1/2 in. GN-1C
    1-3/4 in. GN-1D
    2 in. GN-1E
  • MODEL GG-0

    DESCRIPTION:

    Constructed of galvanized carbon steel. Fits 1″ tall grating and minimal thickness beam edge. The Model GG-0 also may fit 3/4″ tall grating and 1/4″ beam edges.

    GG-0 G-Clip for Steel Grating

     

    SIZING CHART:

    GRATING THICKNESS

    STRUCTURAL MEMBER FLANGE THICKNESS

    up to 1/8” 3/16” to 1/4” 
    3/4 in. GG-0
    1 in. GG-0
  • MODEL GT-R

    DESCRIPTION:

    Attach grating to steel members with horizontal edges. Round top for odd spaced grating bar setups.

    GT-R G-Clip for Steel Grating

    SIZING CHART:

    GRATING THICKNESS

    STRUCTURAL MEMBER FLANGE THICKNESS

    1/4” to 3/4” 3/4” to 1-1/4” 1-1/4” to 1-3/4” 1-3/4” to 2-1/4”
    1 in. RGG-1A RGG-2A RGG-3A RGG-4A
    1-1/4 in. RGG-1B RGG-2B RGG-3B RGG-4B
    1-1/2 in. RGG-1C RGG-2C RGG-3C RGG-4C
    1-3/4 in. RGG-1D RGG-2D RGG-3D RGG-4D
    2 in. RGG-1E RGG-2E RGG-3E RGG-4E
  • MODEL SSGT-R

    DESCRIPTION:

    316 stainless steel. Attach grating to steel members with horizontal edges. Round top for odd spaced grating bar setups.

    SSGT-R G-Clip for Steel Grating

    SIZING CHART:

    GRATING THICKNESS

    STRUCTURAL MEMBER FLANGE THICKNESS

    1/4” to 3/4” 3/4” to 1-1/4” 1-1/4” to 1-3/4” 1-3/4” to 2-1/4”
    1 in. RSSGG-1A RSSGG-2A RSSGG-3A RSSGG-4A
    1-1/4 in. RSSGG-1B RSSGG-2B RSSGG-3B RSSGG-4B
    1-1/2 in. RSSGG-1C RSSGG-2C RSSGG-3C RSSGG-4C
    1-3/4 in. RSSGG-1D RSSGG-2D RSSGG-3D RSSGG-4D
    2 in. RSSGG-1E RSSGG-2E RSSGG-3E RSSGG-4E

Sources: ASTM Standards for Mechanical Fasteners and Related Processes 2nd Edition, Inch Fastener Standards 8th Edition, Kanebridge Fastener Reference Guide 4th Edition, GClips.com

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.