STS Industrial - Bolts & Screws




The Standon Model #S89 Flanged Pipe Support is designed to support a horizontal pipe line via existing bolts through the pipe flange. User supplies desired length of schedule 40 pipe to insert between the upper collar and lower base cup. Vertical adjustment is attained through the use of threaded rod in the upper collar to which the flange bracket is attached.


2″ through 48″


Flange Plate: ASTM A36, Collar/Base Cups: ASTM A53 D.O.M Tubing, Threaded Stud: ASTM A307 Rolled Thread, Base Plate: ASTM A36 Sheet Steel – 0.25″ Plate, Optional: 100% 304 Stainless Steel


Electro-Galvanized (unless Stainless), Optional Finishes Available


All Welds: 100% MIG Welded- Electrode E70XX, Plates: Laser Cut, Radiused Corners


Collar and base cup accept standard IPS pipe, no threading is required.

Standon Model S89 Flanged Adjustable Pipe Support


    Standon Model S89 Flanged Pipe Support Specifications


    Measure Distance from flange to floor.

    1. Measure distance from bottom of flange to finish floor elevation.

    Cut Sch. 40 pipe 4" shorter.

    2. Cut a piece of schedule 40 pipe 4″ less than the previously measured distance.

    Thread collar onto stud of flange bracket and insert Sch. 40 pipe into collar and base.

    3. Thread the collar assembly all the way onto the stud of the flange bracket, then assemble the completed support including the cut pipe pipe section and position under the flange.

    Turn collar counter-clockwise to tighten.

    4. Turn the collar assembly counter-clockwise until the bracket holes align with the flange holes. Install the flange bolts and tighten to specified torque (for the flange). Insure that the base assembly is positioned directly under piping system. Base may be secured to the floor with 1/2″ wedge anchors if required.

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.