STS Industrial - Bolts & Screws

 

PIPE COVERING PROTECTION SADDLE

FOR NOMINAL THICKNESS OR COVERING SHOWN

FIG 160: 1″

FIG 161: 1-1/2″

FIG 162: 2″

FIG 163: 2-1/2″

FIG 164: 3″

FIG 165: 4″

FIG 165A: 4″ ALLOY

FIG 166A: 5 1/2″ ALLOY

APPLICATION

Pipe Covering Protection Saddles are designed for use on insulated high temperature systems where heat losses are to be kept to a minimum and to protect insulation against damage.

SIZE RANGE

3/4″ through 36″

MATERIAL

  • Figs 160, 161, 162, 163, 164, and 165 are curved carbon steel plate.
  • Figs 165A and 166A are alloy steel manufactured from ASTM A 387 Grade 22 Chrome Molybdenum steel plate.
  • All other saddles have welded in center plate for pipe sizes 12″ and larger.
  • All saddles are 12″ long with edges turned up.

MAX TEMP

Carbon Steel 650° F, Alloy Steel  950° F

COMPLIANCE

ASME B31.1, Federal Specification A-A-1192A (Type 39A & 39B), WW-H-171-E (Type 40A & 40B), ANSI/MSS-SP-69 and MSS SP-58 (Type 39A & 39B)

NOTE

Permits finished, weather tight covering of all points of pipe support. It is recommended that saddle be welded to pipe.

Pipe Covering Protection Saddles

  • INSTALLATION DRAWINGS:

    Pipe Covering Protection Saddle Installation Drawing

    Pipe Covering Protection Saddle Installation Drawing 2

    Pipe Covering Protection Saddle Installation Drawing 1

    The above drawings represent some common installations of the pipe support represented on this page. Installation types and configurations are not limited to the drawings above, but should always follow the manufacturers guidelines for application and installation.

  • DIMENSIONS & LOADS:

    Pipe Covering Protection Saddle Drawing

    Fig 171 Single Pipe Roll Sizing for Insulated Pipe

  • PRODUCT CROSS REFERENCE¹:

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 160

    Carpenter & Paterson Figure 351
    Piping Technology Figure 184
    PHD Figure 651
    B-LINE Figure B3160

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 161

    Carpenter & Paterson Figure 352
    Piping Technology Figure 185
    PHD Figure 653
    B-LINE Figure B3161

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 162

    Carpenter & Paterson
    Piping Technology Figure 186
    PHD Figure 654
    B-LINE Figure B3162

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 163

    Carpenter & Paterson
    Piping Technology Figure 187
    PHD Figure 655
    B-LINE Figure B3163

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 164

    Carpenter & Paterson
    Piping Technology Figure 188
    PHD Figure 656
    B-LINE Figure B3164

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 165

    Carpenter & Paterson
    Piping Technology Figure 189
    PHD Figure 658
    B-LINE Figure B3165

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 165A

    Carpenter & Paterson
    Piping Technology
    PHD
    B-LINE Figure B3165SS

    MANUFACTURER

    FIGURE NUMBER

    Anvil International

    Figure 166A

    Carpenter & Paterson
    Piping Technology
    PHD
    B-LINE

    ¹Product loads, weights, and dimensions may vary from manufacturer to manufacturer. Products may not be identical in size and shape. The Product Cross Reference is a guide for the product application only.

  • Also Known As

    Pipe Shields / Saddles

    Insulation Pipe Shields / Saddles

    Insulation Protection Pipe Shields / Saddles

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.

Sources: Anvil International Pipe Hangers and Supports, Carpenter and Paterson Pipe Support Hardware