STS Industrial - Bolts & Screws

 

SADDLE GRATING CLIPS

APPLICATION:

Grating fasteners to attach grating to a horizontal structural member.

Saddle clips are intended to fasten grating via a bolt or screw through a structural member below the grating. In many cases, a single size saddle clip will fasten multiple sizes of grating with the length of screw used being the only variable.

 

Saddle Grating Clips

VARIATIONS:
  • MODEL F-10 GALVANIZED

    DESCRIPTION:

    Most common saddle clip. Hot dipped galvanized carbon steel.

    RECOMMENDED SELF-DRILLING SCREW SIZE:

    GRATING HEIGHT

    1”

    1-1/4” 1-1/2” 1-3/4”

    2”

    SCREW

    14 X 1-1/2”

    14 X 2” 14 X 2” 14 X 2-1/2”

    14 X 2-1/2”

    Table above gives the recommended #3 point self-drilling screw size for use in metal structure up to 1/4″ thick. Recommendations not valid for thicker structural members.

     F-10 Saddle Grating Clip Dimensions

  • MODEL F-10 304 STAINLESS

    DESCRIPTION:

    Most common saddle clip. 304 stainless steel construction for use in certain corrosive environments.

    RECOMMENDED STAINLESS SELF-DRILLING SCREW SIZE:

    GRATING HEIGHT

    1”

    1-1/4” 1-1/2” 1-3/4”

    2”

    SCREW

    14 X 1-1/2”

    14 X 2” 14 X 2” 14 X 2-1/2”

    14 X 2-1/2”

    Table above gives the recommended #3 point stainless steel self-drilling screw size for use in metal structure up to 1/4″ thick. Recommendations not valid for thicker structural members.

    F-10 Saddle Grating Clip Dimensions

  • MODEL I-60

    DESCRIPTION:

    Available in 316 stainless steel. Intended to secure fiberglass grating to structural member.

    SIZING:

    GRATING CLIP

    GRATING

    RECOMMENDED SCREW SIZE

    “H”

    I-60-1 1” High Fiberglass Grating

    14 X 1”

    27/32″

    I-60-1.5 1.5” High Fiberglass Grating

    14 X 1”

    1-5/16″

    Dimension “H” is the height of the saddle clip as seen in the drawing to right. Table above gives the recommended #3 point stainless steel self-drilling screw size for use in structure up to 1/4″ thick. Screw recommendations not valid for thicker structural members.

    I60 Saddle Grating Clip Dimensions

Sources: ASTM Standards for Mechanical Fasteners and Related Processes 2nd Edition, Inch Fastener Standards 8th Edition, Kanebridge Fastener Reference Guide 4th Edition, GClips.com

Note: All material included on this page is informational only, and should not be used as one’s sole source for design purposes. STS Industrial, Inc. and its affiliates do not guarantee the accuracy of the information on this site, and retain no liability for the use or misuse of the information contained on this site.